Heat Pump Installation
HEAT PUMP INSTALLATION IN PASADENA, CA
California has set a goal of 6 million heat pumps installed statewide by 2030, and mild climates like Pasadena's are where the technology performs best, since winter temperatures rarely challenge a modern heat pump's heating capacity. Performance Plumbing, Heating & Air Conditioning, Inc. provides heat pump installation in Pasadena, CA and throughout the San Gabriel Valley, sizing systems for both heating and cooling loads, planning electrical and line set runs, and commissioning each mode. With 40+ years in heating and cooling, we compare options honestly and price every installation upfront. The old equipment is removed, and the new system is tested in heating and cooling before we leave.
TWO AGING SYSTEMS CAN BECOME ONE OUTDOOR UNIT.
A heat pump moves heat instead of creating it, pulling warmth from outdoor air in winter and pushing indoor heat outside in summer. For many Pasadena homes, that means one efficient system can replace both an aging furnace and an old air conditioner, simplifying maintenance and reducing reliance on gas. It is a practical change for many households.
We help you decide whether a heat pump fits your home, your electrical service, and your comfort expectations before recommending anything. Honest fit always comes first with us, every time.
- Sizing for heating and cooling loads
- Electrical capacity review
- Ducted and ductless system options
- Commissioning in both operating modes
HEAT PUMP INSTALLATION
ALL-ELECTRIC COMFORT MADE FOR PASADENA WEATHER.
Pasadena winters are mild, with most nights staying well above freezing, which lets a heat pump heat efficiently almost every day of the year. In summer, the same system cools as effectively as a conventional air conditioner. We evaluate your home's insulation, ductwork, and electrical panel, then recommend a system sized for both seasons and install it with the care that makes all-electric heating and cooling feel effortless.
SOME PANELS ARE READY FOR A HEAT PUMP, AND SOME ARE NOT.
Homes across the San Gabriel Valley vary widely, from older houses with limited electrical service to newer homes with ductwork already suited for a heat pump. Some homes may need a panel review, while others can switch without major changes. We identify those factors early, plan equipment placement for quiet operation and airflow, and make sure the system integrates cleanly with your existing ducts, thermostat, and outdoor space.
GOING ALL-ELECTRIC IS A DECISION WE HELP YOU MAKE HONESTLY.
Not every home is ready for a heat pump on day one, and we will tell you if yours needs electrical upgrades, duct changes, or simply a different approach. With 40+ years in heating, cooling, and gas work, we understand both traditional systems and modern heat pumps, so our advice reflects your home instead of a trend. Curious whether a heat pump makes sense for your household?
WHAT A PROPERLY INSTALLED HEAT PUMP DELIVERS.
Efficient Year-Round Comfort
A single heat pump delivers efficient heating in winter and effective cooling in summer, keeping your home comfortable across every season with one integrated system and one maintenance plan.
Lower Heating Costs
Because heat pumps move heat instead of burning fuel, they can deliver several units of heat for each unit of electricity used, which often lowers winter heating costs significantly.
Reduced Gas Reliance
Replacing a gas furnace with a heat pump reduces combustion equipment in your home, simplifying safety concerns and positioning your household for a more electric future.
Consistent Temperatures
Variable-speed heat pumps adjust output continuously, holding steady temperatures and reducing the hot and cold swings common with older single-stage furnaces and air conditioners. Comfort stays even.
Quieter Operation
Modern outdoor units and variable-speed indoor blowers run quietly, making bedrooms, home offices, and backyard spaces more peaceful throughout both heating and cooling seasons. Neighbors appreciate it.
Possible Incentives
California utilities and statewide programs periodically offer rebates for qualifying heat pump installations, and we can help you review current options before finalizing your equipment choice.
our services
OUR HEAT PUMP INSTALLATION WORK.
We install heat pump systems for homes throughout Pasadena and the San Gabriel Valley, from full central replacements to targeted ductless solutions, always sized and commissioned for heating and cooling performance.
CENTRAL SYSTEM
Ducted Heat Pump Installation
A central heat pump pairs an outdoor unit with an indoor air handler or coil, using your existing ductwork. We size it for both seasons, connect everything carefully, and commission each mode.
FURNACE SWAP
Furnace To Heat Pump Conversion
Replacing a gas furnace and air conditioner with a heat pump requires planning for electrical capacity, air handler placement, and controls. We manage those details so the conversion feels straightforward and dependable.
DUAL FUEL
Dual Fuel System Installation
A dual fuel setup pairs a heat pump with a gas furnace, using the heat pump most of the time and the furnace on colder days. We configure controls so switching happens automatically.
NO DUCTS
Ductless Heat Pump Installation
Ductless mini-split heat pumps heat and cool individual rooms or zones without ductwork. We place indoor heads carefully, route line sets neatly, and set up each zone for balanced comfort.
POWER READY
Electrical Planning and Connection
Heat pumps need dedicated circuits and correct disconnects. We review your panel capacity, coordinate any required electrical work, and complete the equipment connections so the system operates safely and reliably.
SMART SETUP
Thermostat and Controls Configuration
Heat pumps need thermostats configured for their staging, defrost, and backup heat settings. We install compatible controls and program them correctly, which protects efficiency and prevents unnecessary auxiliary heat use.
WHAT OUR CLIENTS SAY.
THE WORD ON OUR WORK
THE WORD ON OUR WORK
WHAT OUR CLIENTS SAY.
Homeowners who switch to heat pumps with us often mention the honest planning conversation, including frank advice about their electrical panel and ductwork. They also appreciate quieter operation, even temperatures, and a clear explanation of how to use the new thermostat.
FAQ
FREQUENTLY ASKED QUESTIONS.
Considering a heat pump raises questions about performance, electrical needs, costs, and how it compares with gas heating. These answers explain what homeowners should know before choosing an all-electric system for their home.
Do Heat Pumps Work Well In Pasadena's Climate?
Very well. Pasadena winters are mild, so heat pumps operate efficiently nearly every day of the heating season, while also handling summer cooling. Modern variable-speed models maintain strong heating capacity even on the coldest mornings the region typically experiences.
Will I Need An Electrical Panel Upgrade For A Heat Pump?
Not always. Many homes already have enough capacity, especially when a heat pump replaces an existing air conditioner. Older homes with small panels may need upgrades, and we review your panel during the estimate to explain requirements clearly.
Can A Heat Pump Use My Existing Ductwork?
Frequently it can, as long as the ducts are properly sized and in good condition. Heat pumps rely on steady airflow, so we inspect ducts for leaks, crushing, and undersized runs before recommending equipment or any necessary duct modifications.
What Is The Difference Between A Heat Pump And An Air Conditioner?
An air conditioner only moves heat out of your home. A heat pump includes a reversing valve that lets it move heat in either direction, so the same outdoor unit provides both cooling in summer and heating in winter.
What Is A Dual Fuel Heat Pump System?
A dual fuel system combines a heat pump with a gas furnace. The heat pump handles most heating efficiently, while the furnace takes over during colder periods. Controls switch between them automatically based on temperature and your efficiency preferences.
Are There Rebates For Installing A Heat Pump In California?
Rebate and incentive programs change often, but California utilities and statewide initiatives have offered funding for qualifying heat pump installations. Availability depends on equipment, income, and program budgets, so reviewing current options before any purchase is always worthwhile.
How Long Does Heat Pump Installation Take?
Performance Plumbing, Heating & Air Conditioning, Inc. completes most heat pump replacements in Pasadena, CA within 1 to 2 days. Furnace conversions, electrical upgrades, or ductless systems with several zones may take longer, and we provide a clear timeline during the estimate.
Why Choose Us For Heat Pump Installation In Pasadena?
Homeowners in Pasadena, CA rely on Performance Plumbing, Heating & Air Conditioning, Inc. for honest heat pump advice, careful sizing, and commissioning in both modes. Because we understand gas, electric, and plumbing systems, our recommendations consider your entire home thoughtfully.
HOW WE WORK
FROM FIRST QUESTION TO ALL-ELECTRIC COMFORT, HERE IS HOW.
STEP 01
WE REVIEW YOUR HOME
We inspect your current heating and cooling equipment, ductwork, electrical panel, and outdoor space. Those details show whether a heat pump fits easily or needs preparation, such as electrical or duct changes. Nothing is assumed.
STEP 02
WE SIZE FOR BOTH SEASONS
Using load calculations, we size the heat pump to handle both summer cooling and winter heating. Balancing the two prevents undersized heating or oversized cooling that would compromise comfort and efficiency. Balance matters.
STEP 03
WE PRESENT CHOICES
You review ducted, ductless, and dual fuel options with upfront prices and expected operating costs. We explain the benefits of each honestly so you can choose the system that fits your goals. No pressure applies.
STEP 04
WE PREPARE THE SITE
Our team removes old equipment, sets pads or brackets, and prepares electrical connections and line set routes. Careful preparation keeps installation day efficient and the finished work neat and durable. Cleanup follows every stage.
STEP 05
WE INSTALL AND CHARGE
We set the outdoor and indoor units, braze and pressure test refrigerant lines, evacuate the system, and charge it to specification. Every connection is checked carefully before the system starts. Quality takes time.
STEP 06
WE COMMISSION BOTH MODES
Finally, we test heating and cooling operation, verify airflow and defrost settings, and configure the thermostat. You receive a walkthrough explaining how to use and care for your new heat pump. Questions are always welcome.